The S-5-H90 is a one-piece clamp that was developed to securely and cost-effectively accommodate metal roof panels with a horizontal seam greater than 0.65″. Turning the clamp 90 degrees so that the bolt hole side is facing up, slip the clamp on the seam and tighten the setscrews.
Installation is Easy
Turning the clamp 90 degrees so that the bolt hole side is facing up, slip the clamp on the seam and tighten the setscrews. Go to the tools page for information and tools available for properly attaching and tensioning S-5!® clamps.
After the clamp is installed, affix ancillary items using either of the two threaded bolt holes and bolt provided. The S-5-H90 is perfect for use with the S-5!® ColorGard® and X-Gard™ snow retention systems and other heavy-duty applications.
The strength of the S-5-H90 clamp is in its simple design. The setscrews will slightly dimple the metal seam material but will not puncture it—leaving roof manufacturers’ warranties intact.
Load Test Results
Contact your distributor for pricing and ordering.
Product packages in boxes of 30 and cases of 150.
Broken box quantities may incur additional charges.
Setscrews, flanged bolts and a screwgun bit tip are included in each box.