Skip to main content

CorruBracket™

Strong Enough for Heavy-Duty, Commercial Applications, Mount Almost Anything to 7/8″ and 3/4″ Rib Pitch U.S. Corrugated Metal Roofing.

CorruBracket Brochure

Bottom-Fixed, Low-Profile Metal Roof Bracket for Corrugated Roofing.

CorruBracket is ideal for mounting snow guards and other heavy-duty applications to corrugated roofing. Compatible with the PVKIT® for direct-attach™ solar PV mounting when there is an underlying wood deck. This metal roof bracket can also be used with railed mounting.

Fastened through the roof panel and into the structure, CorruBracket utilizes two to four fasteners specifically designed to outlive the roof.

Note: CorruBracket must be mounted directly over and into the supporting structure of the roof, (i.e. wood decking, wood or steel purlins or trusses) – NEVER into the metal roofing material alone.

With no messy, field-applied sealants, there’s no chance for leaks. CorruBracket comes with factory-applied, butyl sealant already in the base. The part design conceals the sealant, preventing UV degradation and over-compression of the sealant when fasteners are secured.

CorruBracket has been rigorously tested normal-to-seam (pull-up) and parallel-to-seam (drag load) for load-to-failure results on wood decking, metal, and wood purlins.

Due to the various mounting applications, CorruBracket screws and bolts are offered separately through distribution or direct.

Be sure to check out the many other features on the bracket overview page.

CorruBracket Works for the Following Roofs:

Spacer

Exposed-Fastened, Corrugated

Corrubracket corrugated roof profile bracket

MSRP:

Minor Box: $7.07 Qty: 75

Master Box: $6.83 Qty: 225

*Pricing above is per bracket in USD. Prices vary based on region and other factors. Pricing improves with order quantity. Broken boxes may be subject to handling charges. Call your Authorized S-5! Distributor for current pricing.

Use Our Project Configurator

Corrubracket corrugated roof profile bracket
Corru bracket metal roof corrugated

Product Specifications:

  • For 7/8″ and 3/4″ high x 2.67” rib-pitch U.S. corrugated metal roofs
  • Fastens through roof panel and into the structure 
  • Reservoir conceals sealant from UV exposure, preventing UV degradation and over-compression of sealant 
Corru bracket metal roof corrugated

Is the CorruBracket the Best Choice for Your Roof Profile?

Image

CorruBracket fastens in the low (or between the ribs), through the deck into the structure and accommodates a rib pitch of +/- 2.67” (68 mm).

Select the Right Fastener

CorruBracket installed on corrugated roofing solar PV rails

How to Install the CorruBracket on Your Roof Profile*

No surface preparation is necessary. Simply wipe away excess oils and debris; peel the release paper, align and apply.

CorruBracket is mounted directly into the supporting structure of the roof (i.e. roof decking, and wood or steel purlins). Secure through the pre-punched holes using the appropriate screws for the supporting structure.

*See more detailed installation instructions in the PDF below.

CorruBracket Installation Instructions

CorruBracket installed on corrugated roofing solar PV rails

Have More Questions?

Submit your information by clicking the form below, and we’ll get back to you almost immediately.

FAQs

Is there a way to use ColorGard on other roof types?
How does S-5! ensure its brackets are weathertight?
How do I find out what my substrate is / and then how do I determine the best method to attach my brackets?
Should I use additional sealant around the brackets?
TO TOP
Project Dashboard & Product Downloads

Configurator

Recent Snow Projects

Recent Solar Projects

Product Downloads