S-5-N Clamps
From time to time, roll forming equipment manufacturers make slight “tweaks” and dimensional changes in their roll tooling. Recently we became aware that the S-5 N may not seat properly on limited profiles. If the profile is wider than .56 inches at the base, the current S-5-N clamp may not fit over the seam. For a full explanation Click Here.
S-5-N Clamp
The S-5-N is designed for heavy duty applications such as snow retention. The S-5-N can be used to mount S-5!’s ColorGard® to popular nail strip profiles, providing the strongest snow retention system on the market. An angled wall with a nose permits the S-5-N to engage the triangle type profiles during the installation process, and the S-5! zero-penetration technology preserves the roof manufacturers’ warranties. With S-5-N clamps, mounting heavy duty applications to nail strip profiles just got a whole lot simpler!
Installation is Easy
An angled wall with a nose permits the S-5-N to engage the triangle type profiles during the installation process—there is no longer a need to hold the clamp in place while setscrews are tensioned. The combination of these two features allows the clamp to sit straighter on the seam.
Load Test Results
Packaging
Contact your distributor for pricing and ordering.
Product packages in boxes of 30 and cases of 150.
Broken box quantities may incur additional charges.
Setscrews, flanged bolts and a screwgun bit tip are included in each box.
