PVKIT® 3.0
DirectAttach™ rail-less solar mounting for metal roofs, engineered to pair with S-5! clamps and brackets.
Solar Performance Starts with Smart Integration.
Solar performance starts with smart integration. PVKIT® 3.0 delivers a lighter, faster rail-less mounting system with standard low-profile and optional 50 mm riser configurations for greater project flexibility. engineered mounting system.
Compared to rail-mounted systems, PVKIT® 3.0:
- Hardgoods - Uses 70% fewer components than rail-mounted systems.
- Shipping - Up to 85% less mounting-system weight and volume reduces freight and logistics costs.
- Transportation - Lower system weight and volume simplify material handling and jobsite logistics.
- Lifting equipment - Lightweight, compact components reduce rooftop material handling.
- Aesthetics - Sleek, low-profile design with an optional 50 mm riser when added clearance is desired.
Rail-Less Solar Mounting, Engineered for Metal Roofs
PVKIT® 3.0 uses S-5! clamps and brackets to create a complete DirectAttach™ mounting system without rails.
- reduces the weight of the mounting system by 85%
- provides 25% better load distribution
- uses 70% fewer components
- lowers material costs
By eliminating rails, PVKIT® 3.0 reduces system weight, volume and components while simplifying shipping and installation. Its rail-less design is not constrained to purlin locations, giving designers greater layout freedom. Choose the standard low-profile configuration or add the optional 50 mm riser when more roof-to-module clearance is desired.
Get Your Solar Mounting Checklist
Use it to guide your next project through layout, design, cost, project logistics and aesthetics.
PVKIT Features:
- Compatible with S-5! clamps and brackets
- Rail-less DirectAttach™ design
- Preassembled and lightweight
- Fits 1.0-1.4 in. (26-35 mm) module frames.
- Installs with a single tool
- Can be used with almost any S-5! attachment bracket
- Pre-assembled components
- Installs with a single tool
- 25% better load distribution
- UL 2703-compliant bonding and grounding
- Supports simplified wire management
- Standard low-profile configuration
- Optional 50 mm riser for added clearance
PVKIT Works for the Following Roof Type:
Exposed-Fastened
Standing Seam
Corrugated
PVKIT® 3.0 Mounting Assembly
Compatible S-5! Mini Clamp
Pairs PVKIT® 3.0 with the appropriate S-5! clamp for standing seam metal roof profiles.
(Pictured: S-5-E Mini. Visit our clamp overview page to view additional attachment solutions.).
Compatible S-5! Bracket
Pairs PVKIT® 3.0 with the appropriate S-5! bracket for exposed-fastened metal roofing.
(Pictured: ProteaBracket™ for exposed-fastened, trapezoidal rib metal roofing. Visit our bracket overview page to view additional attachment solutions.)
How to Install PVKIT® 3.0
Select the appropriate S-5! clamp or bracket for the metal roof profile. Follow the PVKIT® 3.0 Installation Instructions for mounting assembly placement. Install PV modules using the preassembled PVKIT® 3.0 hardware. Use the optional 50 mm riser where additional module clearance is desired. Use the optional module splice where seam spacing limits mounting zones. Complete installation per the published PVKIT® 3.0 instructions.
*Refer to the PVKIT® 3.0 Installation Instructions for complete installation requirements.
PVKIT Product Sheets & Install Instructions
PVKIT 3.0 Brochure
PVKIT 3.0 Installation Instructions
PVKIT Solar Manual
Solar Brochure
Find More Technical Documentation in
Have More Questions?
Submit your information by clicking the form below, and we’ll get back to you almost immediately.
FAQs
When should the optional 50 mm riser be used?
Use the optional 50 mm riser when additional roof-to-module clearance is desired for improved airflow, easier wire management or balance-of-system integration.
How does PVKIT® 3.0 bond and ground PV modules?
PVKIT® 3.0 pairs with S-5! clamps and brackets to create a complete, engineered DirectAttach™ mounting system for metal roofs.
How much load will S-5! clamps hold?
The answer to this question varies with the load direction, the seam profile, the roof material and the clamp model. We have conducted hundreds of tensile load tests parallel to the panel seam and on various gauges and profiles, and we have tabulated the results for your convenience. See Load Test Results for more information. In this parallel load direction, any loads introduced into the clamp will accumulate into the point of fixity. Panels must be adequately attached to resist these loads.
Should I be concerned about metallurgical compatibility?
Metallurgical compatibility is extremely important. Incompatibility can cause rapid galvanic corrosion and void material warranties. S-5! aluminum clamps are totally compatible with painted or unpainted G-90 galvanized steel, bare or painted Aluminized, Galvalume, Zincalume, ZincalumePlus, Acrylume Galvalume Plus, Galfan and Galvanneal steel. They are also compatible with aluminum (painted, bare or anodized), titanium-zinc (VM & Rheinzink) and stainless steel. Our brass clamp is compatible with copper roofing.