S-5-TH™ Clamp

The answer to this question varies with the load direction, the seam profile, the roof material and the clamp model.

These variables result with a wide range of holding capacities from ±300 lbs (235 kg) to ±4,000 lbs (1800 kg). This is why for critical applications it is important to correctly identify the roof panel, seam type, gauge, etc along with the recommended seam clamp for the specific roof.  [ link-- Clamp-to-seam tool]  When used on some “applied cap” architectural type seam styles, S-5! may yield low load-to-failure results as compared with integrated seam profiles. Always check our load table to verify the correct allowable holding strength on your specific roof type.

S-5! clamps will not fit on face-fastened trapezoidal rib or corrugated type panels. While our clamps won't work on thru-fastened roofs, we do have bracket products for them. Explore our entire line of brackets.

S-5! products will not fit to hollow “batten” seam type panels (see images in red below) - but can be used for the traditional (wood-backed) batten seam folded joints, as shown below in green.

Any time there is a folded seam we can usually attach a clamp to it. A great way to know if we have a product for your roof is to determine what the roof is with our "Clamp-to-Seam tool".