Skip to main content

S-5-R465™ Clamp

Unique Opposing Setscrew Clamp Design Engages Ribs Beneath Top Bulb, Maximizing Holding Strength on Rib Roofs.

S-5-R465 & Mini Brochure

Are You Looking for a Heavy-Duty Attachment Solution for Rib-Roof Profiles?

The S-5-R465 (“R” stands for Rib-Roof) is a non-penetrating, standing seam metal roof (SSMR) clamp.

The R465 is specially designed for the Zambelli RIB-ROOF 465, McElroy Metal’s Mirage II, Rib Roof Metal Systems’ Rib Roof, DimonDek® 400, Steel & Tube Paneldek 400 and similar roof profiles. This clamp utilizes two pairs of opposing setscrews to engage the seam material. 

Minis Available

The R465 Mini clamp is a more economical solution for lighter duty attachments where Herculean holding strength is not required.

All standard and Mini clamps undergo rigorous load testing. Negative load normal-to-seam testing (pull-up) is performed on all Mini clamps, and parallel-to-seam testing (drag load) is performed on all standard clamps.

Be sure to check out the many other features on the clamp overview page.

Choose the R465 (or its Mini) to mount walkways, snow guards, solar panels and other mechanical equipment to Rib-Roof and similar metal roof profiles.

MSRP:

Minor Box:

$9.38 Qty: 30 | $7.05 (Mini) Qty: 50

Master Box:

$9.07 Qty: 120 | $6.82 (Mini) Qty: 200

*Pricing above is per clamp in USD. Prices vary based on region and other factors. Pricing improves with order quantity. Broken boxes may be subject to handling charges. Call your Authorized S-5! Distributor for current pricing.

Use Our Project Configurator

The S-5-R465 is the Best Solution for the Following Roofs:

Spacer

Rib Roof Standing Seam

S-5-R465

S-5-R465 Mini

Spacer

Product Specifications:

  • Unique design with opposing setscrews that engage the ribs beneath the top bulb, maximizing published holding strength
  • Heavy-duty applications, such as snow retention
  • Four T-30 Torx round-point setscrews (Torx bit tip provided)
  • One M8 bolt included
Spacer

Does the S-5-R465 Fit Your Roof Profile?

How to Install the S-5-R465 Clamp on Your Roof Profile*

Place the clamp over the seam at the desired location. Tighten setscrews to the correct tension so the seam is centered within the clamp throat.

Then, affix ancillary items using the bolt (provided with standard R465 clamp; sold separately for the R465-Mini). 

*See more detailed installation instructions in the PDF below.

*S-5! clamps may be moved in the event of initial misplacement. However, due to the ensuing oxidation process which acts as a natural thread lock, we can express no opinion to the performance of a clamp once it has been removed and reinstalled or the ability to remove the clamp after this process has occurred.

S-5-R465 Installation Instructions

Have More Questions?

Submit your information by clicking the form below, and we’ll get back to you as soon as possible.

FAQs

How much load will S-5! clamps hold?
Do S-5! clamps inhibit thermal movement of the roof panels?
What spacing should be used with S-5! clamps for PV assemblies?
Can you save money by mounting solar on a standing seam metal roof?
TO TOP
Project Dashboard & Product Downloads

Configurator

Recent Snow Projects

Recent Solar Projects

Product Downloads

Your Cart

No Item Found
Subtotal$0.00
Shipping$0.00
Tax$0.00
Total$0.00
0