S-5-K Grip Snow Clamps

The S-5-K Grip Snow clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options.

S-5-K Grip Snow Clamp

s-5-t-mini-dim

Installation is Easy

To install the S-5-K Grip Snow, place the clamp insert just under the fold of the rib at the desired location. Next, position the clamp by rolling it over the seam and the clamp insert piece, ensuring it is centered over the clamp insert with approximately 2 mm of insert overhang on each side of the clamp. By hand, partially thread the two flanged bolts into the base of the S-5-K Grip Snow. The bolts should engage the divots in each end of the S-5-K Grip Snow insert. Lastly, tighten the base bolts using a ratchet or screw gun with a 13 mm hex. For optimal holding strength, bolts should be tensioned to 20 in. lbs. Secure S-5! ColorGard snow retention system to clamps according to ColorGard Installation instructions.

s5kgripsnow-installsteps

Load Test Results

S-5-K Grip Snow Load Test Results

Packaging

Contact your distributor for pricing and ordering.

Product packages in boxes of 20 and cases of 100.
Broken box quantities may incur additional charges.

Setscrews, flanged bolts and a screwgun bit tip are included in each box.