S-5-K Grip™ Clamps

The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options.

S-5-K Grip Clamp

s5kgrip-031915

Insert Options

S-5-GX 10 Insert
LYSAGHT KLIP-LOK® 406
McElroy Metal Mirage
AEP Span Klip-Rib®
Metal Sales Clip-Loc
SpeedDeck® SpeedDeck®
Safintra Saflok 410
Safintra Saflok 700
Domico Dach®
And other similar profiles

S-5-GX 50 Insert
LYSAGHT KLIP-LOK Classic® 700
LYSAGHT KLIP-LOK 700 Hi-Strength®
Stramit® Speed Deck Ultra®
Fielders KingKlip® 700
And other similar profiles

If you have a profile not listed here, please contact S-5! to request a sample for testing.

Installation is Easy

To install the S-5-K Grip, place the clamp insert just under the fold of the rib at the desired location. Next, position the clamp by rolling it over the seam and the clamp insert piece, ensuring it is centered over the clamp insert with approximately 2 mm of insert overhang on each side of the clamp. By hand, partially thread the two flanged bolts into the base of the S-5-K Grip. The bolts should engage the divots in each end of the S-5-K Grip insert. Lastly, tighten the base bolts using a ratchet or screwgun with a 13 mm hex. For optimal holding strength, bolts should be tensioned to 20 inch pounds.

s-5-k-grip-4-steps-illus

Load Test Results

S-5-K Grip Load Test Results

Packaging

Contact your distributor for pricing and ordering.

Product packages in boxes of 20 and cases of 100.
Broken box quantities may incur additional charges.

Setscrews, flanged bolts and a screwgun bit tip are included in each box.