Your browser does not currently support JavaScript.

If your are using Netscape 2 or later then you can enable JavaScript.

Version 2 or 3: Choose Options|Network Preferences, choose the Languages tab, click Enable Javascript and then click OK.

Version 4: Choose Edit|Preferences|Advanced, click Enable JavaScript and then click OK.

With Internet Explorer 5: Go to Tools Menu|Internet Options, Security Tab and click on the Custom Level. Then select disable active scripting under the scripting section.

Mini's Ram AD
Frequently Asked Questions
General Snow Retention

_
Why Keep Snow on the Roof?
When snow avalanches off of a rooftop, it can damage anything in its path! This sudden release of snow can be dramatic - dumping tons of snow all at once.
More info...

How are S-5!™ Snow Retention Systems attached?

S-5! Snow Retention Systems are attached using patented S-5!™ clamping technology.  S-5! attachments are all mechanical, and squeeze the seam with round point setscrews.  S-5! attachments leave you with:
  • No unreliable adhesives
  • No panel penetration
  • S-5! attachments do not violate the panels' thermal movement
  • Unequaled holding strength
  • No premature corrosion
  • S-5! attachments do not violate roof system warranties
  • Recommended by all leading metal building and metal panel manufacturers
More info...

Can S-5!™ Snow Retention Systems be retrofitted to an existing roof?
Yes, ColorGard® and SnoFence™ can easily be retrofitted to existing roofs or incorporated onto a new construction design. They can be installed any time of year using power tools that are common to the trade.
More info...

Should the Snow Retention System be customized to the job?
Yes - any product should be - including those sold by other companies. Everything has a failure point, which is why products are tested; so that point is known. The idea then, is not to expose a product to forces which exceed its known point of failure. These forces are predictable and can be calculated accurately for any application. Ask your distributor for design assistance or visit the ColorGard® calculator  on this website.
More info...

What about cost?
S-5!™ Snow Retention Systems are the best buy on the market! Better holding strength, better color retention, user-friendly installation - this all equates to higher cost, right? Wrong! Everyone wants better quality - as long as it costs less. Well, with S-5!™ Snow Retention Systems you can have your cake and eat it too! When compared with other fence-type systems on a cost per foot basis, S-5!™ wins, hands down - even though it is several times stronger than most of those systems. When compared to individual cleat-type units and pound-for-pound of holding strength, S-5!™ costs much less - yes, even less than the plastic parts. Installers prefer S-5!™ so much that they often charge less to install S-5!™.

What is the approximate linear foot cost of a ColorGard system?
Pound for pound of holding strength, S-5! ColorGard is the best buy on the market, but because ColorGard assemblies are designed to the specifics of each project, costs vary widely depending upon those specifics. 

The variables are as follows:

Clamp Frequency:  Based on seam spacing; also sometimes you can skip seams depending upon design loads.

Clamp Model: Based on seam and profile- some clamp models are more expensive than others.

Use of SnoClip:  In some cases SnoClip is optional and may be omitted from the assembly.

Purchase Quantity:  S-5 components use columnar pricing according to order quantity.  The larger the order the lower the unit costs.

Following are examples of how these variables can affect cost:


Example 1
Clamp spacing:  Seams are 16” on center. But the design service load requires a clamp only every second seam

Clamp model:  The profile is 1.5” double folded, requiring the S-5-E, our lowest cost clamp.

SnoClip:  seam height is 1.5” and user has elected not to use SnoClip.

Purchase Quantity:  Total assembly length required:  2,700 ft

Part takeoff consists of:
(1013) S-5-E clamps placed on every other seam
(338) Pieces of 8ft ColorGard
(1013) VersaClips

This job will cost about $4.51 per lineal foot.

Example 2
Clamp spacing:  Seams are 16” on center. The service design load requires a clamp to be used on every seam.

Clamp model:  The special profile requires the S-5-Z.

SnoClip:  Seam height is 2-3/4” and SnoClip III to be used at every panel.

Purchase Quantity:  Total assembly length required:  24 ft

Part takeoff consists of:
(16) S-5-Z clamps placed on every seam
(3) Pieces of 8ft ColorGard
(16) VersaClips
(15) SnoClip III (every 16”)

This job will cost about $13.79 per lineal foot.

The above figures are based upon Manufacturers suggested pricing and do not include freight, tax or color strip.  Color strip is sometimes made from scrap and in such cases is a zero cost item.  In other cases it may cost up to $0.35 per foot if specially fabricated from outside sources.

We have chosen examples from opposite ends of the spectrum for purposes of illustration.  Most jobs will fall somewhere between.  Your distributor can always assist with pricing individual projects.  Our on-line calculator can assist with determination of quantities.

How do I know which system to choose?
If there is a design objective to color-match pre-painted steel or aluminum roof material, then ColorGard® is the obvious choice. If the project involves mill finish, traditional folded standing seam or batten seam copper, then brass SnoRail™ or SnoFence™ is the perfect solution. If the design calls for slender, cylindrical shapes - look at SnoRail™ or SnoFence™ in mill finished aluminum. And for slightly heavier duty applications - use stainless steel SnoRods™.