These clamps can be installed with or without a supplemental sheet metal screw, providing truly unsurpassed holding power. When using the clamps for snow retention, the assembly should be specifically engineered to each individual project for maximum protection.

Installation is as simple as mating the clamp halves and starting the M8 bolts. Position clamp on seam and tighten the M8 bolt with a ratchet or electric tool while securing the clamp with a locking C-clamp. Go to www.S-5.com/tools for information and tools available for properly attaching and tensioning S-5!™ clamps.

Tested on AEP Span Klip-Rib® 24 gauge Galvalume.

@ 52.25 lbs allowable without optional screw
@ 231.65 lbs allowable with optional screw

The S-5-K Clamp is normally used on the lapped rib (not the intermediate rib). It can be used on either rib when using the optional sheet metal screw. For installations involving the sheet metal screw, the flanged half of the clamp MUST be placed opposite to the open edge of the seam. When using the clamp for snow retention, the S-5-K Clamp assembly should be specifically engineered to each individual project.