Your browser does not currently support JavaScript.

If your are using Netscape 2 or later then you can enable JavaScript.

Version 2 or 3: Choose Options|Network Preferences, choose the Languages tab, click Enable Javascript and then click OK.

Version 4: Choose Edit|Preferences|Advanced, click Enable JavaScript and then click OK.

With Internet Explorer 5: Go to Tools Menu|Internet Options, Security Tab and click on the Custom Level. Then select disable active scripting under the scripting section.

Which clamp on horizontal seams?

For horizontal seams under .5" Use the S-5-E and crimp the seam to 180 degrees at desired clamp location.

For horizontal seams under .5" you may also use the S-5-T to avoid crimping the seam.

For horizontal seams greater than .5" and less than .625" use the S-5-T.

This illustration demonstrates crimping technique, NOT actual location of clamp.

For horizontal seams greater than .65"

For horizontal seams greater than .65" use the S-5-U in its horizontal orientation.

For horizontal seams less than .65" you may also crimp the seam as shown above for the S-5-E.